Tortuga Cove - Your Source For Gaming and Hacking News

Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 With LV1 Peek/Poke Support

FeaturedMost Hit User Rating:  / 16
PoorBest 

 

Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 With LV1 Peek/Poke Support* Added full support for Rogero 4.30CFW Version 2.00

- LV1 peek/poke support
- PS1 disc backups support
- Direct Disc Access support
* Added new function in "Home" column - "* Install Package Files"
* Added new option in "Settings" - "Install Package Files Method"
- User can pick from either "Standard" or "PSN Style (bubble)" modes
- Bubble mode shows installable packages as PSN downloaded content in Game column (or under Rebug's Package Manager/PSN Content)
- To select a package file (*.pkg):
-- Use [* Install Package Files] option in Home column or
-- double click on a pkg file in mmOS/File Manager (when "bubble" method is used the PS3 will reboot)
* Fixed copying of AVCHD/Blu-ray movie backups from Video column



 

Image


 

 

Image

Link -------> Showtime ver 04.01.224.pkg ( Clicked 3 times )





N.B: You must have multiMAN version 04.12.00 installed on the PS3 before updating to CFW4.30 v2.00 or you won't be able to install Package files until you downgrade again to version 3.55 and Install multiMAN 04.12.00

Link -------> Rogero_CEX4.30_V2.00.PUP ( Clicked 3 times )

CFW4.30 Version 2.00 MD5: 116ecceb79b2adde8479fd24951a5a90
CFW4.30 Version 2.00 Size: 191 MB (201,263,364 bytes)




Link -------> Rogero_CEX4.21_V2.00.PUP ( Clicked 2 times )

CFW4.21 Version 2.00 MD5: 9e3053031c58490ebaf5ea5e6c7cb34c
CFW4.21 Version 2.00 Size: 191 MB (201,153,979 bytes)

This CFW4.21 is almost the same as the 4.30 version except it have some add-ons that can't be added to ver 4.30 currently:
1- It does have the default "Install Package Files" node on XMB. (no need to have multiMAN installed before using it)
2- It does have LV1 Checks Disabled and can be used directly instead of Rogero3.55 v3.7 while downgrading with Hardware Flashers.
3- It does have the Proper Cinavia Disabled Files for the users who needs it.





This CFW was tested on most PS3 Models by different testers and no problems were encountered.
But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.



* For details about Updating from any CFW to CFW4.30/4.21 v2.00 Please read the Guide below

* For details about Downgrading back to CFW/OFW3.55 Please read the Downgrade Guide below




Rogero CFW4.30/4.21 v2.00 Details
4.30 v2.00
- Rebuilt from scratch using OFW4.30 files only (no DEX/SEX files) with official XMB and full features working as in OFW4.30
- All known problems like XMB icons sorting and Demo Mode issues from v 1.04 are now all gone with the use of the official XMB.
- Removed the classical "Install Package Files" Icon from XMB to have a 100% original XMB (no DEX/SEX files used).
- Installing Package Files can be done from multiMAN 04.12.00 (XMMB Home column or MMOS File Manager).
- Patched LV1 to disable LV2 Protection.
- Patched LV1 to add peek/poke support to replace hvc 182/183 (multiMAN Direct Disc Access is now working fine with CFW4.21/4.30 v2.00)
- Patched LV1 to disable SYSTEM MANAGER INTEGRITY CHECK (to prevent Bricking on non-dehashed downgraded consoles)
- Patched LV1 Core OS Hash Check (to prevent Bricking on non-dehashed downgraded consoles)
- Patched LV2 to add peek/poke support. (for both LV1 and LV2)
- Patched VSH to enable ReActPSN compatibility (Allow Unsigned act.dat and *.rif files, Disable Unlinking/Deleting of act.dat)
- Spoofed the system version to latest OFW version 4.31.
- PSN/SEN access is available as long as the current "passphrase" still the same.
- Loading games from App_home Icon is now fixed.
- It can run games signed with Keys up to version 4.30 without any Eboot/Sprx patching needed
- Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
- Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21/4.30

4.21 v2.00
- Same Features as CEX_4.30 v2.00 plus the following add-ons:
1- It does have the default "Install Package Files" node on XMB. (no need to have multiMAN installed before using it)
2- It does have LV1 Checks Disabled and can be used directly instead of Rogero3.55 v3.7 while downgrading with Hardware Flashers.
3- It does have the Proper Cinavia Disabled Files for the users who needs it.




ATTENTION:

1- This CFW does have LV1 checks disabled and can be installed on Downgraded PS3 consoles even if not dehashed after downgrade. Just in case anyone still need to dehash, here's the link Link ----> Dehashing Tutorial

2- Always make a NOR/Nand dump using multiMAN before installing any CFW to have a recovery backup in case of any bricks.
Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a chance to recover when you have a valid dump.

** A Hardware Flasher alone without a valid dump may not fix your bricked PS3 **

3- The QA flag is better to be always Enabled on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg

4- Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks.

5- DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First.

6- You need to be already on a 3.55OFW or 3.55+ CFW to install this. Installing from any OFW > 3.55 won't work. (Hardware Flasher needed)



- Updating from CFW3.55/4.21/4.30 to the CFW4.21/4.30 v2.00 should be done using the following steps :

1- If you are on any CFW newer then 3.55 you can try updating from Recovery Mode to CFW4.21/4.30 v2.00.
---- If it didn't work (Data corrupted Error), then you'll have to Downgrade back to Rogero CEX3.55 v3.7 using the guide above.

2- Once on Rogero CEX3.55 v3.7 or any 3.55OFW/CFW, Update using the XMB update option to CFW4.21/4.30 v2.00
---- If it didn't work (Data corrupted Error), Start the PS3 into Recovery Menu and update yo CFW4.21/4.30 v2.00.





- Downgrading back to 3.55 is always possible using the following steps :
- Download the Downgrader PUP ---> Downgrader PUP mirror ---> Downgrader PUP
...Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- While on Rogero CFW4.30, go to System Update from XMB and install the Downgrader PUP.
- After the Downgrader PUP installs you'll be on a hybrid CFW3.55 that will still shows ver4.21/4.30 from system settings.
- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any CFW 3.55/4.21/4.30.


Useful Hint ( for Slims / FATs with NOR Flash only ):
you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0






- Changing/Upgrading the HDD while on Rogero CFW4.30 should be done using the following steps :
- Download the Downgrader PUP ---> Downgrader PUP mirror ---> Downgrader PUP
Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- Swap the current HDD with the New HDD, Turn the PS3 on, follow screen instructions and let it install the Downgrader CFW.
- After the Downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.
- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any CFW 3.55/4.21/4.30.


Useful Hint ( for Slims / FATs with NOR Flash only ):
you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0





Credits to :
- PS3DevWiki for the valuable and always up-to-date source of information.
- Deank for his continuous efforts on Multiman and all his assistance during the build process.
- Cybrskunk for the hints about fixing the UPL package and the Build number ( although it didn't work yet as it should :()
- Tortuga-cove staff for the support forum.
- Andoma for his work on his excellent Showtime Media Player.
- All the Beta-Testers and all Tortuga-Cove members for their support and patience.

Download and Source: http://www.tortuga-cove.com/forums/viewtopic.php?f=75&t=4035

Refresh Posts
Re: Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 -- johndoe1210
Wednesday, 21 November 2012 00:25
Once again Thank you very much.rogero your a gentleman and a scholar
Re: Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 -- rogero
Wednesday, 21 November 2012 00:33
As usual, any mirror links provided to the current download links will be appreciated...

Cheers
Re: Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 -- heraf250
Wednesday, 21 November 2012 01:02
Downloading Thank you
Re: Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 -- kgb
Wednesday, 21 November 2012 01:05
Guess i'll only try it tomorrow, still downloading it... almost 10 min downloading...on a 100Mb/s line LOOL (mediafire is getting worse and worse)

2321376682.png

Thank you for another update Rogero icon_e_wink.gif
Re: Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 -- arpan4
Wednesday, 21 November 2012 01:06
well v2.0 is great improvement and thank you very much for that but its still not perfect like multiman needed to be installed first and it cannot be updated directly from 4.30 cfw as for some people updating directly works but for most of the users it doesn't like me so i hope you will completely fix this problem in next update its really irritating to go back to 3.55 first etc etc

Latest Post

Online

Main Site

We have 42 guests and 0 members online

    Forums

    We have 49 guests and 4 members online