• Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell • MTX Glitcher 360 / Glitcher II - Tortuga Cove
    Register

    Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Discussion and Support

    Moderators: Rogero, bitsbubba

    { VISITS } Views: 3847  Favorites Favorites: 1  Followers Followers: 2 
    Favorites: psp_frank2
    Followers: kl1k, psp_frank2
    Member
    Random avatar
    Posts: 2
    Joined: Sat May 26, 2012 3:14 am

    Has thanked: 0 time
    Been thanked: 2 times
    Reputation point: 0
    Newbie

    Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Postby SonicDcer » Sat May 26, 2012 3:35 am

    Hi, i've glitched many slims and a few jaspers with Matrix Glitcher v2, but this Jasper CB 6753 doesn't seem to boot with xell no matter what i do.

    The Matrix Glitcher v2 Blue Light turns on for a few seconds, then off, then on for a few seconds, just normal as any other glitch mod i've made before.

    I'm running Dash 14719, i've even tried this wiring (below) as well as the one in the diagram in the download section of infinitymod.com and got the same results:

    Image

    I'm not sure how do i need to put the switches but i've tried these combinations

    A)
    Switch 1: SLIM

    1 ON 2 OFF 3 OFF 4 ON

    B)
    Switch 1: FAT

    1 ON 2 OFF 3 OFF 4 ON

    C)
    Switch 1: SLIM

    1 ON 2 ON 3 ON 4 OFF

    None of them worked for me.

    Here is my J-Runner Log just to be sure:

    J-Runner v0.2 Beta (275) Started



    Checking Files
    Finished Checking Files
    Initializing Nand..
    Nand Initialization Finished
    Comparing...Takes a while on big nands
    Nands are the same
    * unpacking flash image, ....
    ECC'ed - will unecc.
    UnECC'ed
    * found decrypted CD
    * found XeLL binary, must be linked to 0x1c000000
    * we found the following parts:
    SMC: 2.3
    CB_A: 6753
    CB_B: 6753
    CD (image): 6753
    CD (decrypted): 9452
    * checking required versions...
    ok
    * patching SMC...
    Patching Jasper version 2.3 SMC at offset 0x12BA
    * Replacing CD...

    * XOR HACK NEEDED FOR CB 6753
    * patching CB_B...
    patchset for 6752 found, 4 patch(es)
    * Applying XOR Hack to CB_B 6753
    *** Re-encrypting CB_B with xor keystream
    *** Fixing entrypoint
    * Replacing CB_A 6753 with 6752
    * encrypting CB...
    * constructing new image...
    * base size: 70000
    * No separate recovery Xell available!
    * Flash Layout:
    0x0..0x1FF (0x200 bytes) Header
    0x200..0xFFF (0xE00 bytes) Padding
    0x1000..0x3FFF (0x3000 bytes) SMC
    0x4000..0x7FFF (0x4000 bytes) Keyvault
    0x8000..0x9ABF (0x1AC0 bytes) CB_A 6752
    0x9AC0..0x1317F (0x96C0 bytes) CB_B 6752
    0x13180..0x1917F (0x6000 bytes) CD 9452
    0x19180..0xBFFFF (0xA6E80 bytes) Padding
    0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
    0x100000..0x13FFFF (0x40000 bytes) Xell (main)
    * Encoding ECC...

    100%
    ------------- Written into output\image_00000000.ecc


    I've also tried Multibuilder 0.94 with same results.

    My soldering is well made (i could take a few pictures if you guys need to see them, just ask).

    Maybe i need to reprogram the matrix v2 chip to work with RGH 2.0 ? If yes, how?

    It's really weird for me because i have another jasper with RGH 1 wiring and matrix v2 running dash 14719 just fine.

    I really don't know what else to do. If anybody could help me i would really appreciate it. Thank you!

    Site Admin
    User avatar
    Posts: 1354
    Joined: Thu Jun 30, 2011 3:27 am

    Has thanked: 69 times
    Been thanked: 756 times
    Reputation point: 284
    NoviceNoviceNovice

    Re: Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Postby S4BRE » Sat May 26, 2012 9:42 am

    with the new dash you have to use rgh2
    good luck
    Image
    Tortuga Cove Administrator

    Member
    Random avatar
    Posts: 2
    Joined: Sat May 26, 2012 3:14 am

    Has thanked: 0 time
    Been thanked: 2 times
    Reputation point: 0
    Newbie

    Re: Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Postby SonicDcer » Sat May 26, 2012 2:30 pm

    Isn't it exactly what i'm using?

    Member
    Random avatar
    Posts: 75
    Joined: Sat Jan 21, 2012 1:21 am

    Has thanked: 15 times
    Been thanked: 89 times
    Reputation point: 56
    Novice

    Re: Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Postby steveo1978 » Sat May 26, 2012 11:11 pm

    looks like you are doing it right, but check your soldering to make sure you have a good connection and also what type of wire are you using for the cpu_rst (point A)?
    Image

    Site Admin
    User avatar
    Posts: 145
    Joined: Fri Jan 06, 2012 2:51 am
    Location: your cupboard

    Has thanked: 5 times
    Been thanked: 108 times
    Reputation point: 28
    Novice

    Re: Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Postby pbanj » Sun May 27, 2012 12:10 am

    you should post pictures of your install,

    Member
    Random avatar
    Posts: 14
    Joined: Wed Feb 29, 2012 3:10 pm

    Has thanked: 0 time
    Been thanked: 6 times
    Reputation point: 0
    Newbie

    Re: Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Postby kl1k » Thu Jun 21, 2012 8:41 am

    Where did you get that diagram from? I don't seem to see it on the MI site?

    Member
    Random avatar
    Posts: 2
    Joined: Mon May 14, 2012 12:31 am

    Has thanked: 0 time
    Been thanked: 2 times
    Reputation point: 0
    Newbie

    Re: Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Postby marineroster » Sat Aug 11, 2012 6:38 pm

    Use the cable that connect to other points from point A ( cpu_rst ) and not too long , do not solder bottom jumper on the chp .

    Member
    User avatar
    Posts: 9
    Joined: Wed Nov 21, 2012 1:36 pm

    Has thanked: 4 times
    Been thanked: 9 times
    Reputation point: 5
    Novice

    Re: Jasper CB 6753 + Matrix Glitcher v2 + 14719 Not Booting Xell

    Postby Denis® » Thu Nov 22, 2012 4:26 pm

    Same here :| :( Just made this post to see if somebody can help me.

    Return to MTX Glitcher 360 / Glitcher II

    Who is online

    Users browsing this forum: No registered users and 1 guest